Pilot RC 2.2m Matrix Sport Jet with Electric Retracts, Scheme 01

Pilot RC 2.2m Matrix Sport Jet with Electric Retracts, Scheme 01

After many successful with Predator Jet we decided to develop NEW sportjet for new era. The Pilot-RC Matrix is an innovative approach to a new sport jet/ 3Djet. Great capabilities had to be combined between sport jet and unbeatable 3D performance. everything aerodynamic we tested and learned from Predator and develop together with one of the best pilot in the world for Matrix performance so we can say this is best ever sport jet with ultimate flying characteristics for precise aerobatics and 3D aerobatics at the same time.

The Matrix all feature and shape of airframe this from one of the best designer Mirco Pecorari from Aircraftstudiodesign, a little like the charismatic hypercars style.

SPECIFICATIONS:

Model:Matrix 2.2m
Wingspan:78.7″ (2,000mm)
Length:87.6″ (2,225mm)
Weight:21.9lbs (9.94kg) with 14kg turbine


  • $5999.00AUD
  • including GST
Qty:  
Only 1 left in stock
OR

FEATURES:

  • Extremely lightweight full composite construction especially designed for outstanding sport flight with 3D performance
  • Painted outside the mold so no seam lines
  • Ultra light weight landing gear,  the 2.2m predator sport jet V2 landing gear can use to the Matrix too. 
  • Specially designed easy access to turbine for speedy installation
  • Field setup can be done in seconds, thanks to the quick releases on the wings without the need for any tools.
  •  the single elevator clamp from the top, only a few turns to tight/loose the bolt then you can install/take out the stabilizer. 
  • Removable wing and elevator for easy transport
  • The equipment installation board make the electronic items with very clear installation. Most of the wire can be hidened. 
  • pre-install tube for the stab/rudder extension wire, easy to install. 
  • Option with vector tail pipe for 3D flight. 

INCLUDED HARDWARE:

  • Complete air frame (including carbon wing-tubes and preinstalled and painted fiberglass control horns)
  • Servo extension leads
  • normal tail pipe (optional Vector thrust pipe)
  • 3.800ml fuel tank (optional upgrade to fuel bag)
  • 250ml UAT tank
  • Pre-prepared pushrods with ball links
  • Servo connector brackets

REQUIRED HARDWARE:

Turbine size:

  • 100-140N for normal sport flying
  • 160-180N for 3D vector flight – Avoid high speed high G flying

Servos: Total x10 (x5 standard size + x5 medium size)

x3 standard size high torque
x2 for flaps (minimum 40kg)
x1 for rudder (minimum 40kg)

x7 medium size servo  (size: 35x15x30mm)
x2 for ailerons (minimum 16kg)
x2 for elevators (minimum 16kg)
x1 for vector elevator (minimum 16kg), this is option
x1 for vector rudder (minimum 16kg), this is option
x1 for steering (minimum 10kg)

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

IDEO:




    • SKU
      PRC Matrix 2.2 01
    • Weight
      30.0000 kg

Customers who viewed this product also bought