- ARF Models by Brand
- Aerobatic Sport Planes
- Sport Scale Planes
- Jets
- WarBirds
- Engines, Turbines and Electric Motors
- Electronics
- Servo and Surface Hardware
- Fuel, Smoke and Air Fittings
- Exhaust Systems
- Props and Spinners
- Wheels, Tailwheels, Axles
- Scale Pilot Figures and Dashes
- Adhesives, Fixings, and Materials
- Tools and Meters
- Wing Bags
- Merchandise and Apparel
- YouTube Videos
Categories
Refine Your Search
Gift cards
New arrivals
PowerBox Mobile Terminal
- $129.00AUD
- including GST
JetCat Gas Regulating Valve
- $69.00AUD
- including GST
JetCat Turbine Mounting Clamp P100RX
- $89.00AUD
- including GST
Engine Mounts and Stand-Offs
Sort by:Recommended
Blazing Star Stand-Off Set, Standard X-Long
Blazing Star Standard Extra Long Standoff Set
Blazing Star Standard Extra Long Standoffs are the same diameter as our standard set with added length. They are intended for our new 74" Slick 580 when using the Xpwr 30cc motor as well as previous 3DHS 74" AND 75" planes that use the Xpwr 30 or Motrolfly 4330. They provide a minimum standoff length of 73.84 mm (2.90") and a maximum length of 94.87 mm (3.73"). Please note: the holes in the radial mount for the Xpwr 30cc will need to be enlarged to 5mm.
The Blazing Star Standoff Sets are designed specifically to work with our Xpwr Giant Scale motor line. They provide a simple and secure way to mount the 35cc-60cc Xpwr motors to a variety of airframes. They may also be used to mount gas engines when the Blazing Star mounts are not long enough for a particular application..
Key Features
Rugged 7075 T6 alloy material.
Adjustable design to accommodate a wide range of mounting scenarios.
Large rear washer to effectively distribute load.
All bolts required for mounting are included (5mm socket head cap bolts).
Attractive anodized red finish with Blazing Star and X logos.
Standard set adjustable in length from 45mm-66mm (1.77"-2.59")(45mm Base, 10mm, 5mm, 2 x 3mm Spacers)
Select STANDARD for Xpwr 30-40cc applications*
XX-LARGE for Xpwr 60cc applications
* Note: the 3DHS 79" Slick requires the XXL Standoff with the Xpwr 40cc motor- $59.00AUD
- including GST
Blazing Star Delrin Spacer Set
These are additional spacers for the Blazing Star DA-60/70/120 standoffs.
Specifications
Spacer 1: 3 mm
Spacer 2: 2 mmOnly 6 left in stock.- $14.90AUD
- including GST
Blazing Star DA150/170/200 Standoff
Blazing Star DA-150/170/200 Standoff. (80mm x 90mm hole pattern.)
16mm length with additional 2mm and 3mm Delrin spacers included.
Extreme Flight is pleased to announce the return of Blazing Star engine mounts and standoffs to the RC market. Late last year we secured the rights to produce these mounts from Mr. Kyle Whitley. We decided to keep the Blazing Star name as this line of products was well received by the RC community and was known as a very high quality product.
Our first releases are for the DA-60, DA-70, and DA-120 in sizes specific to our aircraft. A unique addition to these aluminum mounts is the inclusion of both a 2mm and 3mm Delrin spacer that has been machined to the same footprint of the mount itself. This allows flexibility over a wide range of models to achieve proper cowl/spinner clearance. The mounts are machined from 7075 T6 aluminum and are anodized red with the Blazing Star logo laser etched on the mount.
Only 9 left in stock.- $89.00AUD
- including GST
Blazing Star DA-60 Standoff
Blazing Star DA-60 Standoff - 1 inch length with additional 2mm and 3mm Delrin spacers included.
Extreme Flight is pleased to announce the return of Blazing Star engine mounts and standoffs to the RC market. Late last year we secured the rights to produce these mounts from Mr. Kyle Whitley. We decided to keep the Blazing Star name as this line of products was well received by the RC community and was known as a very high quality product.
Our first releases are for the DA-60, DA-70, and DA-120 in sizes specific to our aircraft. A unique addition to these aluminum mounts is the inclusion of both a 2mm and 3mm Delrin spacer that has been machined to the same footprint of the mount itself. This allows flexibility over a wide range of models to achieve proper cowl/spinner clearance. The mounts are machined from 7075 T6 aluminum and are anodized red with the Blazing Star logo laser etched on the mount.
Only 10 left in stock.- $79.00AUD
- including GST
Blazing Star DA-70 Standoff
Blazing Star DA-70 Standoff - .75 inch length with additional 2mm and 3mm Delrin spacers included.
Extreme Flight is pleased to announce the return of Blazing Star engine mounts and standoffs to the RC market. Late last year we secured the rights to produce these mounts from Mr. Kyle Whitley. We decided to keep the Blazing Star name as this line of products was well received by the RC community and was known as a very high quality product.
Our first releases are for the DA-60, DA-70, and DA-120 in sizes specific to our aircraft. A unique addition to these aluminum mounts is the inclusion of both a 2mm and 3mm Delrin spacer that has been machined to the same footprint of the mount itself. This allows flexibility over a wide range of models to achieve proper cowl/spinner clearance. The mounts are machined from 7075 T6 aluminum and are anodized red with the Blazing Star logo laser etched on the mount.
Out of stock- $79.00AUD
- including GST
Blazing Star DA-120 Standoff
Blazing Star DA-120 Standoff - 1 inch length with additional 2mm and 3mm Delrin spacers included.
Extreme Flight is pleased to announce the return of Blazing Star engine mounts and standoffs to the RC market. Late last year we secured the rights to produce these mounts from Mr. Kyle Whitley. We decided to keep the Blazing Star name as this line of products was well received by the RC community and was known as a very high quality product.
Our first releases are for the DA-60, DA-70, and DA-120 in sizes specific to our aircraft. A unique addition to these aluminum mounts is the inclusion of both a 2mm and 3mm Delrin spacer that has been machined to the same footprint of the mount itself. This allows flexibility over a wide range of models to achieve proper cowl/spinner clearance. The mounts are machined from 7075 T6 aluminum and are anodized red with the Blazing Star logo laser etched on the mount.
- $89.00AUD
- including GST
Blazing Star Stand-Off Set, Standard
Blazing Star Standard Standoff
The Blazing Star Standoff Sets are designed specifically to work with our Xpwr Giant Scale motor line. They provide a simple and secure way to mount the 35cc-60cc Xpwr motors to a variety of airframes. They may also be used to mount gas engines when the Blazing Star mounts are not long enough for a particular application..
Key Features
Rugged 7075 T6 alloy material.
Adjustable design to accommodate a wide range of mounting scenarios.
Large rear washer to effectively distribute load.
All bolts required for mounting are included (5mm socket head cap bolts).
Attractive anodized red finish with Blazing Star and X logos.
Standard set adjustable in length from 45mm-66mm (1.77"-2.59")(45mm Base, 10mm, 5mm, 2 x 3mm Spacers)
Select STANDARD for Xpwr 30-40cc applications*
XX-LARGE for Xpwr 60cc applications
* Note: the 3DHS 79" Slick requires the XXL Standoff with the Xpwr 40cc motor- $49.00AUD
- including GST
Blazing Star Stand-Off Set, X-Large
Blazing Star XXL Standoff
The Blazing Star Standoff Sets are designed specifically to work with our Xpwr Giant Scale motor line. They provide a simple and secure way to mount the 35cc-60cc Xpwr motors to a variety of airframes. They may also be used to mount gas engines when the Blazing Star mounts are not long enough for a particular application..
Key Features
Rugged 7075 T6 alloy material.
Adjustable design to accommodate a wide range of mounting scenarios.
Large rear washer to effectively distribute load.
All bolts required for mounting are included (5mm socket head cap bolts).
Attractive anodized red finish with Blazing Star and X logos.
XXL set adjustable in length from 60mm-83mm (2.375"-3.26")(60mm Base, 12mm, 5mm, 2 x 3mm Spacers)
Select STANDARD for Xpwr 30-40cc applications*
XX-LARGE for Xpwr 60cc applications
* Note: the 3DHS 79" Slick requires the XXL Standoff with the Xpwr 40cc motor- $59.00AUD
- including GST
Secraft Lock Nut (M6) for engine mount
Lock Nut M6 for engine mount
Body Material: aluminium 6061-T6 (anodized)
Nut Material: steel nut(Nylon insert)
Out diameter : 30mm
4 pcs in 1 package
Total weight : 64g- $55.00AUD
- including GST
Secraft Alloy Engine Stand Offs
Available in lengths from 2mm to 50mm
4 pieces per pack.
Red stand offs (Hole Size 5.5mm)
Blue stand offs (Hole Size 6.5mm)- $12.75AUD
- including GST
Desert Aircraft Engine Standoffs (DA50)
DA50 Engine Standoffs A set of four engine standoffs,
Available in legths of 1.25", 2.5" and 3.0" long. Engine end is drilled and tapped 5mm.
Firewall end is drilled and tapped 6mm.
- $59.00AUD
- including GST