• Now AcceptingPayPal

Receiver

Products: 1–9 of 9
Show:30
Sort by:Recommended
  • PowerBox PBR-5XS 5 Channel Indoor Micro Receiver

    PowerBox PBR-5XS 5 Channel Indoor Micro Receiver

    Features

    • 5 channels
    • 2.4 GHz receiver, compatible with the ATOM / CORE radio control system
    • Chip antenna
    • Range of more than 1000m
    • Direct monitoring of flight battery voltage
    • Telemetry
    • Extreme resistance to interference
    • $107.90AUD
    • including GST
    Sorry, we only have 12 of that item available
  • PowerBox PBR-26XS 26 Channel Receiver

    PowerBox PBR-26XS 26 Channel Receiver

    The PBR-26XS serves as a small receiving unit for any PowerBox system, or as an external expansion receiver for PBR receivers. For optimum reception the PBR-26XS can even be installed in a slim fin, since it is only 4mm thick.

    The PBR-26XS connection communicates PPM12 and S.BUS as well as PowerBox protocols, such as P²-BUS and FastTrack Out, which means that the receive unit can also be used with third-party flight simulators or helicopter gyro systems.

    • $123.90AUD
    • including GST
    Sorry, we only have 15 of that item available
  • PowerBox PBR-10SL 10 Channel 2.4GHz Receiver

    PowerBox PBR-10SL 10 Channel 2.4GHz Receiver

    The receiver units


    Seven different receivers are available to match the ATOM/CORE:

    PBR-10SL

    This is an ultra-slim 10-channel receiver for models with limited internal space. It features one receive section and a P²BUS interface for servo data and telemetry data, plus an additional output which can be set to operate either as the SRXL-Bus or channel 8. It is also possible to connect the iGyro SAT, allowing the integral iGyro function to be used. The internal receive section can be expanded with the PBR-26XS to form a redundant receiving system.

    PBR-9D

    This is a nine-channel receiver with two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 10. It is also possible to connect the iGyro SAT, allowing the integral iGyro function to be used. If the unit is combined with the PBR-26XS, the internal receive sections can be expanded by one additional receive section.

    PBR-7S

    This is a seven-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 8. It is also possible to connect the iGyro SAT, allowing the integral iGyro function to be used. If the unit is combined with the PBR-26XS, the internal receive section can be expanded to form a redundant receiving system.


    PBR-5S

    This is a five-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, while its minuscule size makes it the natural choice for small models. Output 5 can be set to S.BUS, SRXL or PPM signal from the transmitter; typical applications include use with flybarless systems or flight simulators.

    PBR-5XS

    This is an ideal 5-channel receiver for indoor model aircraft. The unit has no case or sockets, reducing its weight to 2g. The servo leads have to be soldered directly to the circuit board. The voltage of a flight battery can be measured directly at the receiver, and sent to the transmitter via telemetry. Installation is significantly eased by the receiver's integral chip aerial.

    PBR-26D

    This is a satellite receiver featuring two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or S-BUS. This unit is designed to be connected to our PowerBox power supply systems or a flybarless system.

    PBR-26XS

    This is an extremely small satellite receiver fitted with one receive section. The receiver features a P²BUS interface for servo data and telemetry data, and can be connected to any PowerBox power supply. It is possible to set the output to FastTrack-Out, S.BUS, SRXL or PPM. If you select the FastTrack-Out option, the PBR-26XS can be employed as an expansion to the receive sections in existing receivers.


    • $170.90AUD
    • including GST
    Only 10 left in stock.
    Sorry, we only have 10 of that item available
  • PowerBox PBR-14D 14 Channel Receiver

    PowerBox PBR-14D 14 Channel Receiver

    Features

    • 14 channel 2.4GHz receiver
    • Two independent redundant receiver circuits
    • Optional PBR26XS to add additional redundancy
    • Extreme interference rejection
    • Ultra-long range
    • Option of iGyro SAT
    • Two integral telemetry / servo bus (P²BUS)
    • 30cm long antennas for all mounting situations
    • Built in electronic switch, activated by integral button, MicroSwitch or MicroMag
    • MPX High power connector up to 20A
    • Powerful real-time telemetry
    • Reception quality, battery voltage, current and capacity available via telemetry at the transmitter
    • Auxiliary output as serial interface (FastTrack, S.BUS and SRXL)   
    • Parameters for all functions can be set from the transmitter
    • $319.00AUD
    • including GST
    Only 8 left in stock.
    Sorry, we only have 8 of that item available
  • PowerBox PBR-12X Power Expander 8260

    PowerBox PBR-12X Power Expander 8260

    Product description

    The PBR-12X is ideal for use in any model where space is limited, but where a large number of channels is required. The square arrangement of the servo sockets allows the PBR-12X to fit even in very narrow fuselages, such as those of, F5J- and F3B-gliders.

    The integral electronic switch is operated using our MicroSwitch. If there is no space for this, the PBR-12X can be activated simply by plugging in or disconnecting the battery, as it stores the last switched state.
    The unit features an integral high-current input with a compact MR30 connector in order to cope reliably with the current drain of twelve servos. An MR30 to MPX adapter is included in the set.

    Any receiver with a bus output can be used as the receiving component. The unit automatically detects the bus system to which it is connected, which means that no set-up work is required apart from setting the fail-safe positions. Two receivers can be connected to form the basis for a redundant receiving system. If the PBR-12X detects lost data packets from the first receiver, they are replaced with the data from the second receiver; there is no loss of data.

    The advantage of separating the receiving section from the servo output is that the receiving component can be installed in the optimum location in the model. For example, if your model has a high carbon fibre content in the area of the wing - fuselage junction , you can install the receiver in the fin.

    The PBR-12X supplies telemetry data to all the listed radio control systems. In addition to battery voltage, the telemetry output includes current and consumed capacity. Reception data, such as lost frames or holds, are also delivered to most systems.

    • $217.90AUD
    • including GST
    Only 7 left in stock.
    Sorry, we only have 7 of that item available
  • PowerBox PBR-5S 5 Channel Receiver

    PowerBox PBR-5S 5 Channel Receiver

    The receiver units:

    Five different receivers are available to match the CORE:

    PBR-9D
    This is a nine-channel receiver with two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 10.

    PBR-7S
    This is a seven-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 8.

    PBR-5S
    This is a five-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, while its minuscule size makes it the natural choice for small models.

    PBR-26D
    This is a satellite receiver featuring two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or S-BUS. This unit is designed to be connected to our PowerBox power supply systems or a flybarless system.

    PBR-8E
    This is a eight-channel receiver with two redundant receiver circuits. The unit features 8 PWM servo outputs and telemetry data for battery voltage and RF-data.

    With the exception of the PBR-5S and the PBR-8E all receivers have a FastTrack interface with which the iGyro SAT can be easily connected!

    • $107.90AUD
    • including GST
    Only 7 left in stock.
    Sorry, we only have 7 of that item available
  • PowerBox PBR-7S 7 Channel Receiver

    PowerBox PBR-7S 7 Channel Receiver

    The receiver units:

    Five different receivers are available to match the CORE:

    PBR-9D
    This is a nine-channel receiver with two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 10.

    PBR-7S
    This is a seven-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 8.

    PBR-5S
    This is a five-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, while its minuscule size makes it the natural choice for small models.

    PBR-26D
    This is a satellite receiver featuring two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or S-BUS. This unit is designed to be connected to our PowerBox power supply systems or a flybarless system.

    PBR-8E
    This is a eight-channel receiver with two redundant receiver circuits. The unit features 8 PWM servo outputs and telemetry data for battery voltage and RF-data.

    With the exception of the PBR-5S and the PBR-8E all receivers have a FastTrack interface with which the iGyro SAT can be easily connected!

    • $138.90AUD
    • including GST
    Only 6 left in stock.
    Sorry, we only have 6 of that item available
  • PowerBox PBR-9D 9 Channel Receiver

    PowerBox PBR-9D 9 Channel Receiver

    The receiver units:

    Five different receivers are available to match the CORE:

    PBR-9D
    This is a nine-channel receiver with two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 10.

    PBR-7S
    This is a seven-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 8.

    PBR-5S
    This is a five-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, while its minuscule size makes it the natural choice for small models.

    PBR-26D
    This is a satellite receiver featuring two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or S-BUS. This unit is designed to be connected to our PowerBox power supply systems or a flybarless system.

    PBR-8E
    This is a eight-channel receiver with two redundant receiver circuits. The unit features 8 PWM servo outputs and telemetry data for battery voltage and RF-data.

    With the exception of the PBR-5S and the PBR-8E all receivers have a FastTrack interface with which the iGyro SAT can be easily connected!

    • $232.90AUD
    • including GST
    Sorry, we only have 13 of that item available
  • PowerBox PBR-26D 26 Channel Receiver

    PowerBox PBR-26D 26 Channel Receiver

    The receiver units:

    Five different receivers are available to match the CORE:

    PBR-9D
    This is a nine-channel receiver with two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 10.

    PBR-7S
    This is a seven-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or as channel 8.

    PBR-5S
    This is a five-channel receiver with a single receiver circuit. The unit features a P²BUS interface for servo and telemetry data, while its minuscule size makes it the natural choice for small models.

    PBR-26D
    This is a satellite receiver featuring two redundant receiver circuits. The unit features a P²BUS interface for servo and telemetry data, and an auxiliary output which can be configured either as SRXL bus or S-BUS. This unit is designed to be connected to our PowerBox power supply systems or a flybarless system.

    PBR-8E
    This is a eight-channel receiver with two redundant receiver circuits. The unit features 8 PWM servo outputs and telemetry data for battery voltage and RF-data.

    With the exception of the PBR-5S and the PBR-8E all receivers have a FastTrack interface with which the iGyro SAT can be easily connected!

    • $170.90AUD
    • including GST
    Sorry, we only have 18 of that item available