- ARF Models by Brand
- Aerobatic Sport Planes
- Sport Scale Planes
- Jets
- WarBirds
- Engines, Turbines and Electric Motors
- Electronics
- Servo and Surface Hardware
- Fuel, Smoke and Air Fittings
- Exhaust Systems
- Props and Spinners
- Wheels, Tailwheels, Axles
- Scale Pilot Figures and Dashes
- Adhesives, Fixings, and Materials
- Tools and Meters
- Wing Bags
- Merchandise and Apparel
- YouTube Videos
Categories
Refine Your Search
Gift cards
New arrivals
PowerBox Mobile Terminal
- $129.00AUD
- including GST
JetCat Gas Regulating Valve
- $69.00AUD
- including GST
JetCat Turbine Mounting Clamp P100RX
- $89.00AUD
- including GST
Futaba
Sort by:Recommended
Futaba R7308SB Receiver, FASSTest with Dual Rx Link
R7308SB– FASSTest Bi-Directional Communication System with S.Bus / S.Bus2 Port and 8 Channels for Conventional System Receiver.
The R7308SB is equipped with the Dual Rx Link system allowing a second FASSTest Rx to be connected via an SBUS2 port and offer Rx redundancy.
- $229.00AUD
- including GST
Futaba R3104SB– T-FHSS Air Telemetry System 4-Channel + S.Bus Receiver
T-FHSS Air (Link ID supported)
SIZE:
18 mm x 41.4 mm x 9.9 mm
0.71 in x 1.63 in x 0.39 inWEIGHT:
4.8 g
0.17 ozOPERATING VOLTAGE:
DC 4.8V~7.4VOnly 1 left in stock.- $72.95AUD
- including GST
Futaba TM-18 920MHz RF Module and R9001SB Rx
Features
・Adopts 920MHz band spread spectrum method
- The transmitter's unique ID code prevents interference from other AdRCSS 920MHz systems.
・Failsafe function (3ch only)
Recommendation
・Receiver equipped with FDLS-1, DLPH-1 or dual Rx link system (R7308SB, R7208SB, etc.)
Please use the AdRCSS 920MHz system as a backup for the 2.4GHz system.
* Due to differences in communication speed between each system, there may be slight differences in operation after switching. This is not abnormal.
Compatible transmitters T32MZ T18SZ T16IZ T16IZS *T16SZ *T12K
*T16SZ and T12K do not have a power supply on the CRFS connector, so a separate power supply is required.
Accessories
・TM-18 RF module
・R9001SB
・CRSF signal connection cable
・double-sided tape
・T32MZ mounting bracket
Specifications
TM-18 RF module
・AdRCSS 920MHz system/maximum 16Ch (depending on transmitter settings)
・Communication method: One-way communication (telemetry not supported)
・Can be used simultaneously with all Futaba 2.4GHz systems (FASSTest 18ch/12ch, FASST MULTI/7ch, S-FHSS, T-FHSS)
・Current consumption: 36mA (maximum)
・Equipped with power down mode (low output mode)
Compatibility
- Can be used by connecting to T32MZ CRSF connector.
・T18SZ, T16IZ, T16SZ, T12K
Please turn on CRSF mode. At this time, S, BUS servo settings cannot be made.
Only 5 left in stock.- $429.00AUD
- including GST
Futaba R9001SB 920 MHz Receiver
Specifications
・AdRCSS 920MHz system S.BUS2 input/output/S.BUS output + conventional system 3ch output
・Diversity antenna
・Power supply 4.8V to 7.4V, dry batteries cannot be used
・F/S function (3ch only)
・Size 37.5x21.1x5.3mm
・Weight: 4.6g
*When using a BEC power supply, the capacity must match the conditions of the servo, etc. you are using.*The maximum number of channels for S.BUS/S.BUS2 output varies depending on the transmitter. (Unused channels become neutral outputs.)
Also, during F/S, the F/S setting channel is in the F/S position, and the other channels are in the Hold state.
*Does not work on 2.4GHz systems. Compatible with TM-18 RF module.
Only 2 left in stock.- $191.50AUD
- including GST
Futaba R7103SB 3 Channel FASSTest Receiver
Futaba R7103SB FASSTest 2.4GHz Receiver with high gain antenna.
SBUS2 input/output. SBUS output plus 2 or 3 port conventional servo output.
Includes external voltage measurement cable for 0 to 70Vdc. (Uses port 2)
(Replacement for R7003)
- $179.00AUD
- including GST
Futaba R7106SB Receiver - 6/18ch 2.4GHz FASST/FASSTest
Specifications Range: Full Modulation: FASSTest & FASST S.BUS: S.Bus & S.Bus2 Weight: 8.5g Dimensions: 22.5 x 38.1 x 12.2mm Voltage: 3.7 - 7.4V Channels: 7 PWM or 18 S-Bus Out of stock- $159.90AUD
- including GST
Futaba R7114SB 2.4GHz 14CH FASSTest/FASST Receiver
The R7114SB is Futaba's flagship receiver brimming with the specifications required in high end models. With 14 PWM channels its built to meet the demands of high-end modellers. For extra versatility the R7114SB is also capable of operating with FASST or FASSTest systems so it can be used with older transmitters or the latest telemetry enabled models. Using the built-in S.Bus technology it is capable of both S.BUS and S.BUS2 operation. The diversity aerials give the best possible signal and allow you to mount the aerials in different axis for the best reception available.
• 14 PWM channels
• High voltage (Up to 7.4V)
• FASST and FASSTest
• FASSTest telemetry capability
• S.BUS and S.BUS2 technology
• Diversity aerials
• Easy binding button
• Desgned for high-end models
• FASST Multi; normal mode or high speed mode- $259.00AUD
- including GST
Futaba Reciever R3006SB for 6K T-FHSS 6 Ch+SBUS
FEATURES
Bi-directional communication with a T-FHSS Air-2.4GHz Futaba
transmitter using the S.BUS2 port
Standard PWM output ports and S.BUS output ports
One year limited warranty through Hobby Services beginning at date
of purchaseINCLUDES
Futaba R3006SB T-FHSS 2.4GHz Receiver with Dual Diversity (two)
Antennas and InstructionsSPECIFICATIONS
Size: 1.7 x 0.98 x 0.35" (43 x 25 x 8.8mm)
Weight: 0.3oz (8.5g)
Rated Voltage: DC4.8-7.4V
Operating Voltage: DC4.0-8.4VBattery F/S Voltage: Sets up with transmitter
Out of stock- $79.00AUD
- including GST
Futaba R3008SB 2.4GHz FHSS Telemetry Receiver 10J
Bi-directional communication with a T-FHSS Air-2.4GHz Futaba transmitter using the S.BUS2 port Standard PWM output ports and S.BUS output ports
Out of stock- $99.00AUD
- including GST
Futaba Receiver Capacitor
1800uF capacitor fitted with Futaba servo lead
Only 7 left in stock.- $17.45AUD
- including GST
Futaba RX Antenna 2.4
Futaba Receiver Antennas
Available in four sizes: 150mm, 210mm, 400mm and 500mm long plus the new base loaded antenna used on the R7108SB Rx.
- $11.90AUD
- including GST
Futaba Base Loaded Receiver Antenna
Futaba Base Loaded Receiver Antenna
Suits newer generation receivers such as the R7108SB
Sold individually
- $19.90AUD
- including GST