Heatshrink

Heatshrink Tubing. Very good quality. Sold by the metre.

Shink rate is around 50%.

Sizes listed are nominal diameter sizes as printed on the heatshrink in some cases. The lay flat dimension is generally much bigger.

Here's our rough guide to selection

22mm - Perfect for KISS 24A and 30A ESCs or other ESC's of similar size

12mm - Good for a typical 20a ESC such as Littlebees

6mm - Suits larger gauge silicon wire, ideal for insulating the soldered connections of XT60's etc

1.5mm - For joins on all single smaller guage wiring such as motor wires, signal wires etc.