Switches and Failsafe

PowerBox™ Individual Replacement Sensor switches with red connector to suit Evolution, Professional, Cockpit, Competition, Cockpit SRS, Competition SRS, Baselog.

Available in 40cm, 60cm or 80cm cable length.

3572

3573

3574

PowerBox™ Individual Replacement Sensor switches with black connector to suit Royal SRS und Royal SR2, Champion SRS, Mercury SRS und Mercury SR2, Competition SR2, Source

40cm.

3570

The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V ignition systems. The SparkSwitch RS enables the user to switch the ignition on and off conveniently from the transmitter. The switched state can be checked at any time using the external LED or a telemetry status message. These features of the SparkSwitch RS enhance operating safety as well as simplifying the handling of petrol engines. In an emergency - such as the failure of a throttle servo - the SparkSwitch RS can be used to stop the engine quickly.

An important feature is galvanic separation between the receiving system and the ignition system. The switching process as well as RPM feedback from the ignition unit are optically isolated from the receiver. This ensures that a fault in the ignition system shielding, or any other defect, cannot cause interference to the sensitive receiving system.

The RPM (rotational speed) monitor input can be connected directly to the Tacho output of the ignition unit - if present. If your ignition system does not include a Tacho socket, we can supply a separate sensor RPM-Probe which can be connected in parallel with the Hall sensor. The RPM data can be transferred to any of the current telemetry systems: the SparkSwitch RS automatically detects the system in use, eliminating the need for adjustments using the USB interface.

The SparkSwitch RS can be supplied in either of two variants: with or without voltage regulation. The regulated variant reliably reduces the input voltage (max. 9.0V) to 6.0V. The version without voltage regulation passes the full voltage (max. 13.0V) through

This Spektrum Deluxe Receiver Switch Harness has 3 leads so that you can mount an external charge jack using the included bracket. All 3 leads use gold plated pins for the best possible operation and lowest resistance; ideal where higher than normal currents are involved. 

Features
Heavy duty switch capable of high amp load applications
22 gauge wire with gold connectors 

Electric Switch Harness ESW-1J

The PowerBox Sensor V3 is the third generation of the PowerBox Sensor, which is well-known throughout the world.

PowerBox™ Individual Replacement Sensor Switch with red connector to suit all PowerBox systems except the iGyro, Royal SRS and Champion SRS.

( See https://www.desertaircraft.com.au/shop/powerbox-switch-assembly-to-suit-igyro-royal-and-champ.html for the sensor switch with black connector.)

The MagSensor represents an alternative method of operating and switching our PowerBox battery backers. The circuit is based on modern extremely sensetive, zero-contact "Hall sensors", which respond to a defined magnetic field by activating the electronic switches in the PowerBox. The Hall sensors do not switch the cur-rent, but simply pass on the switching signal.

Spare magnetic sensor and keyring to suit Powerbox MagSensor switch