Secure mounting bracket for Futaba / JR style connectors. Can be screwed down as a permanent fixture, and comes with safety clip to assure a quick yet secure connection.
Each Servo Connector Bracket replaces the plastic shielding from standard extension leads.
Sold as a pack of 10 pieces.
Pilot RC Alloy Servo Arm
Tapped for M3, dual locking design.
Available only in Futaba (25T) spline, so also suits Savox, MKS, Dualsky and newer Hitec servos that also share this spline.
Lengths available: 0.8", 1.2", 1.6", 2.0" and a 3.1" Double Arm
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
All Pilot-RC servos come with extra long leads for ease of use in smaller models without the need for additional extension leads.
Included with the PW-16AH you will also find a spare Futaba connector and pins, which allow a user to shorten the wire and crimp a brand new connector onto it, should they wish to do so, with everything included in the box. Even with one spare pin, just in case!
| Type | Mini – Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 16kg (222 oz) at 8.4v 13.5kg (187 oz) at 7.4v |
| Speed | 0.057s at 8.4v 0.064s at 7.4v |
| Weight | 52g |
| Dimensions | 35.9mm x 15mm x 33mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
NOTE: This servo now includes an M2 arm, not M3 as shown in some photos
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
NEW FEATURE: Interchangeable servo leads:
Each servo comes ready to use with a standard 30cm lead.
Need a longer lead though?
Included with the servo is a 170cm lead that can be shortened as per your requirements.
Simply remove the servo’s lower casing and swap the short 30cm lead for the
included much longer 170cm lead, and crimp the JR connector
provided to the other end at your chosen length.
The servo uses conventional servo connectors at the servo end,
meaning leads can be made or replaced without issue.
| Type | Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 28.7kg (399 oz) at 8.4v 25.8kg (359 oz) at 7.4v |
| Speed | 0.056s at 8.4v 0.063s at 7.4v |
| Weight | 93g |
| Dimensions | 40mm x 20mm x 39.85mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
NEW FEATURE: Interchangeable servo leads:
Each servo comes ready to use with a standard 30cm lead.
Need a longer lead though?
Included with the servo is a 170cm lead that can be shortened as per your requirements.
Simply remove the servo’s lower casing and swap the short 30cm lead for the
included much longer 170cm lead, and crimp the JR connector
provided to the other end at your chosen length.
The servo uses conventional servo connectors at the servo end,
meaning leads can be made or replaced without issue.
| Type | Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 37.8kg (525 oz) at 8.4v 35.5kg (493 oz) at 7.4v |
| Speed | 0.07s at 8.4v 0.08s at 7.4v |
| Weight | 93g |
| Dimensions | 40mm x 20mm x 39.85mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
NEW FEATURE: Interchangeable servo leads:
Each servo comes ready to use with a standard 30cm lead.
Need a longer lead though?
Included with the servo is a 170cm lead that can be shortened as per your requirements.
Simply remove the servo’s lower casing and swap the short 30cm lead for the
included much longer 170cm lead, and crimp the JR connector
provided to the other end at your chosen length.
The servo uses conventional servo connectors at the servo end,
meaning leads can be made or replaced without issue.
PW-48AH SPECIFICATIONS:
| Type | Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 48kg (667 oz) at 8.4v 43kg (598 oz) at 7.4v |
| Speed | 0.10s at 8.4v 0.11s at 7.4v |
| Weight | 93g |
| Dimensions | 40mm x 20mm x 39.85mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
