- ARF Models by Brand
- Aerobatic Sport Planes
- Sport Scale Planes
- Jets
- WarBirds
- Engines, Turbines and Electric Motors
- Electronics
- Servo and Surface Hardware
- Fuel, Smoke and Air Fittings
- Exhaust Systems
- Props and Spinners
- Wheels, Tailwheels, Axles
- Scale Pilot Figures and Dashes
- Adhesives, Fixings, and Materials
- Tools and Meters
- Wing Bags
- Merchandise and Apparel
- YouTube Videos
Categories
Refine Your Search
Gift cards
New arrivals
PowerBox Mobile Terminal
- $129.00AUD
- including GST
JetCat Gas Regulating Valve
- $69.00AUD
- including GST
JetCat Turbine Mounting Clamp P100RX
- $89.00AUD
- including GST
Extreme Flight RC Accessories
Sort by:Recommended
Extreme Flight Electric Cyclone Spinner
Brand new Extreme Flight Cyclone spinners for electric aircraft! These air race inspired spinners not only give your model an ultra-aggressive look, but they also force air directly over your motor, significantly reducing motor temps. Molded intakes in the cone pull air into the interior while the impeller style machined backplate forces cooling air directly into and around the motor.
- $24.90AUD
- including GST
Extreme Flight Servo Lead Holders (12)
Keep your servo extension exactly where you want them!Made of Foam with a self-stick adhesive base. 12/pkSuper light!- $4.95AUD
- including GST
Extreme Flight Solar Shield 100cc - WHITE
Introducing the Extreme Flight X-Rays Solar Shield!
Designed to protect your prized aircraft from the damaging effects of direct sunlight, the X-Rays Solar Shield will help keep your plane looking its best and lessen the amount of time you spend re-tightening covering. Includes carrying pouch.
Out of stock- $149.00AUD
- including GST
Extreme Flight Solar Shield 100cc - RED
Introducing the Extreme Flight X-Rays Solar Shield!
Designed to protect your prized aircraft from the damaging effects of direct sunlight, the X-Rays Solar Shield will help keep your plane looking its best and lessen the amount of time you spend re-tightening covering. Includes carrying pouch.
Only 5 left in stock.- $149.00AUD
- including GST
Extreme Flight Pilot
Extreme Flight XPilots. Available in 4, 5, 6, and 7" Sizes
- $129.00AUD
- including GST
Extreme Flight Dash Panel
Add a touch of realism to your new aircraft with our new highly detailed and light weight instrument panels. Four sizes to choose from. Comes with clear centre section so you can customize to your liking.
- $39.00AUD
- including GST
Extreme Flight Dash Panel v2
Add a touch of realism to your new aircraft with our new highly detailed and light weight instrument panels. Two sizes to choose from.
Out of stock- $39.00AUD
- including GST
Extreme Flight Anodized Fuel Dots
Product Information
The new Extreme Flight anodized aluminum Fuel Dot was designed for ease of installation, ease of use and an attractive means of getting gas into your model. Only needing a single hole drilled in the side of your model to install, the Extreme Flight fuel dot is secured with a single nut. Best of all the fuel line plug has been appropriately sized to allow you to remove it from the fuel tubing without tearing your fingernails off, a very important feature! Available in Red, Blue, or Black. Be sure to add a package of our high quality blue gas tubing to your order for all your plumbing needs for your new model.
Requires 10mm mounting hole.- $9.90AUD
- including GST
Flowmaster Fuel Tanks by Extreme Flight
Product Information
In our endless search to bring high quality and useful products to our customers, we have added a new series of accessory to our lineup. We are pleased to introduce the new Extreme Flight FLOWMASTER ready-to-run gas tanks. The new FLOWMASTER tanks eliminate the tedious process of building fuel tanks and provide you with an excellent solution. These tanks are molded from high quality plastic and feature an anodized aluminum cap with integral fuel delivery nipple, brass fill and vent fittings and weighted clunk. An O-ring keeps a positive seal between the plastic bottle and cap and an additional length of brass tubing and fuel line clips are included for those that want a more rigid fuel pick up line. (Replacement O-rings available.)
Note: FlowMaster tanks are not designed for glow (nitro) fuel.
All tanks are 3 line system except 9oz which is 2 line.
Only 10 left in stock.- $27.00AUD
- including GST
Flowmaster Fuel Tank replacement O-Ring
Replacement O-ring for FlowMaster Tanks
Out of stock- $0.65AUD
- including GST
Flowmaster Fuel Line (for Petrol) by Extreme Flight
Product Information
Package includes 2 meter length of 1/8 in. (3mm) ID fuel line.
Note: FlowMaster tanks and fuel line are not designed for glow (nitro) fuel.
- $10.90AUD
- including GST
Extreme Flight Electric Spinner
Extreme Flight Elite series spinners have set the standard for electric spinners for well over a decade. Featuring our standard shape, these lightweight spinners add the finishing touch to your new electric aircraft. Available in multiple sizes and colors.
- $29.90AUD
- including GST
Extreme Flight Anodized Washer
Wide aluminium alloy washers perfect for use on canopy screws. Suits 3mm or 4-40 screws. Rubber O ring on the rear face stops any wear from vibration. Available in Black, Blue, Gold or Red in packs of 10 pcs.
- $13.50AUD
- including GST
Blazing Star Stand-Off Set, Standard
Blazing Star Standard Standoff
The Blazing Star Standoff Sets are designed specifically to work with our Xpwr Giant Scale motor line. They provide a simple and secure way to mount the 35cc-60cc Xpwr motors to a variety of airframes. They may also be used to mount gas engines when the Blazing Star mounts are not long enough for a particular application..
Key Features
Rugged 7075 T6 alloy material.
Adjustable design to accommodate a wide range of mounting scenarios.
Large rear washer to effectively distribute load.
All bolts required for mounting are included (5mm socket head cap bolts).
Attractive anodized red finish with Blazing Star and X logos.
Standard set adjustable in length from 45mm-66mm (1.77"-2.59")(45mm Base, 10mm, 5mm, 2 x 3mm Spacers)
Select STANDARD for Xpwr 30-40cc applications*
XX-LARGE for Xpwr 60cc applications
* Note: the 3DHS 79" Slick requires the XXL Standoff with the Xpwr 40cc motor- $49.00AUD
- including GST
Blazing Star Stand-Off Set, X-Large
Blazing Star XXL Standoff
The Blazing Star Standoff Sets are designed specifically to work with our Xpwr Giant Scale motor line. They provide a simple and secure way to mount the 35cc-60cc Xpwr motors to a variety of airframes. They may also be used to mount gas engines when the Blazing Star mounts are not long enough for a particular application..
Key Features
Rugged 7075 T6 alloy material.
Adjustable design to accommodate a wide range of mounting scenarios.
Large rear washer to effectively distribute load.
All bolts required for mounting are included (5mm socket head cap bolts).
Attractive anodized red finish with Blazing Star and X logos.
XXL set adjustable in length from 60mm-83mm (2.375"-3.26")(60mm Base, 12mm, 5mm, 2 x 3mm Spacers)
Select STANDARD for Xpwr 30-40cc applications*
XX-LARGE for Xpwr 60cc applications
* Note: the 3DHS 79" Slick requires the XXL Standoff with the Xpwr 40cc motor- $59.00AUD
- including GST
Blazing Star Stand-Off Set, Standard X-Long
Blazing Star Standard Extra Long Standoff Set
Blazing Star Standard Extra Long Standoffs are the same diameter as our standard set with added length. They are intended for our new 74" Slick 580 when using the Xpwr 30cc motor as well as previous 3DHS 74" AND 75" planes that use the Xpwr 30 or Motrolfly 4330. They provide a minimum standoff length of 73.84 mm (2.90") and a maximum length of 94.87 mm (3.73"). Please note: the holes in the radial mount for the Xpwr 30cc will need to be enlarged to 5mm.
The Blazing Star Standoff Sets are designed specifically to work with our Xpwr Giant Scale motor line. They provide a simple and secure way to mount the 35cc-60cc Xpwr motors to a variety of airframes. They may also be used to mount gas engines when the Blazing Star mounts are not long enough for a particular application..
Key Features
Rugged 7075 T6 alloy material.
Adjustable design to accommodate a wide range of mounting scenarios.
Large rear washer to effectively distribute load.
All bolts required for mounting are included (5mm socket head cap bolts).
Attractive anodized red finish with Blazing Star and X logos.
Standard set adjustable in length from 45mm-66mm (1.77"-2.59")(45mm Base, 10mm, 5mm, 2 x 3mm Spacers)
Select STANDARD for Xpwr 30-40cc applications*
XX-LARGE for Xpwr 60cc applications
* Note: the 3DHS 79" Slick requires the XXL Standoff with the Xpwr 40cc motor- $59.00AUD
- including GST
Secraft Alloy Stand Offs for Electric Motors
Electric moter StandOff Material: aluminium 6061-T6 (anodized) Height: 35mm Bolt Hole Size Dia 4.5mm 4 per package- $6.20AUD
- including GST
Extreme Flight Prop Adaptor and Mount to suit 2814/820
Extreme Flight Prop Adaptor and Mount to suit 2814/820 Torque Series Motors.
- $29.00AUD
- including GST
Extreme Flight Wing bolts
4mm size to suit kits 48" to 64"
6mm size to suit 35cc to 120cc kits
Out of stock- $2.90AUD
- including GST
Extreme Flight Canopy screws
Replacement 3mm canopy screws, pack of 2 including rubber O ring
- $6.00AUD
- including GST
Extreme Flight Light Weight Electric Servo Arm M2
Specifically produced to be used with the hardware in Extreme Flight mid-sized electric models.
Note: lightweight servo arms fit mini servos only.The new Extreme Flight 3" lightweight pull-pull servo arm is the companion to our lightweight single arms for 60"-84" electric models. This dual arm is ideal for models that use a pull-pull system for rudder actuation. It features 2mm threaded holes to accept the 2mm ball link hardware included in our electric models. Available to fit 23, 24 and 25 tooth splines.Only 9 left in stock.- $12.90AUD
- including GST
Extreme Flight MPX Multi-Wire Servo Plug
Extreme Flight is pleased to bring you another quality accessory for your new aircraft. Introducing the MPX multi-wire servo plug. Available in 1, 2 and 3 lead configurations, these plugs make field assembly of models with multiple servo wings much easier and faster while allowing a much cleaner install. Simply attach your servo extensions to the multi-plug extensions and plug the other unit into your receiver. Permanently mount the flanged MPX plug to your fuselage and you will have a simple one plug interface for each wing. 2 sets required for most installations.
Extensions are 6 inches each side of plug... 6 inch female plug, 6 inch male plug,
Housings are now Black instead of Red in all sizes.
PLEASE NOTE:
These sets share power across the connector, common to all servos. Therefore these should not be used for powering other devices requiring a separate power source to the receiver.
- $44.90AUD
- including GST
Extreme Flight Socket Head Screws
Black, 100 per package.
Available in three sizes:
2.6 diameter x 10 mm long with 2mm allen head
2.6 diameter x 15 mm long with 2mm allen head
2.3 diameter x 15 mm long with 2mm allen head
Only 3 left in stock.- $9.90AUD
- including GST
Extreme Flight RC G10 control horn sets.
Control surface horn sets. Made from 1.6mm G10 in various sizes to suit from 48" electric up to 125" gas models.
48" and 60" sets are single horns. 30cc and above are supplied in pairs so a ball link can be used with no fear of flex or twisting.
- $20.00AUD
- including GST
Extreme Flight Axles
Replacement axles to suit Extreme Flight kits. Sold as a pair.
Only 9 left in stock.- $8.00AUD
- including GST