- ARF Models by Brand
- Aerobatic Sport Planes
- Sport Scale Planes
- Jets
- WarBirds
- Engines, Turbines and Electric Motors
- Electronics
- Servo and Surface Hardware
- Fuel, Smoke and Air Fittings
- Exhaust Systems
- Props and Spinners
- Wheels, Tailwheels, Axles
- Scale Pilot Figures and Dashes
- Adhesives, Fixings, and Materials
- Tools and Meters
- Wing Bags
- Merchandise and Apparel
- YouTube Videos
Categories
Refine Your Search
Gift cards
New arrivals
PowerBox Mobile Terminal
- $129.00AUD
- including GST
JetCat Gas Regulating Valve
- $69.00AUD
- including GST
JetCat Turbine Mounting Clamp P100RX
- $89.00AUD
- including GST
Smoke Hardware
Sort by:Recommended
Powerbox Smoke Pump
The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.
The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.
The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.
If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.
The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.
The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.
- $273.90AUD
- including GST
PowerBox Smoke Tubing
PowerBox braided rubber tube to suit smoke systems.
Rubber hose to suit PowerBox smoke pumps. 3.5mm ID, 7.5mm OD fibre reinforced. Per 100mm lenngth.
(Sold in continuous lengths over 100mm. ie buy 2 = 1 piece of 200mm)
Out of stock- $3.90AUD
- including GST
Powerbox Jet Smoke Pump
The PowerBox Jet Smokepump is a high volume version of the popular original PowerBox smoke pump.
- $290.90AUD
- including GST
Holy Smokes Smoke System
The Holy Smokes Smoke System is the result of a collaborative, three-year development and testing effort with Danhakl Designs.
Our Vision: Provide superior, repeatable smoke system performance. Constructed of carbon fiber composite, the pump is lightweight at only 1.90oz. It provides a variable & programmable flow rate ensuring maximum smoke fluid vaporization.
This system has extensive field-testing with years of modeling experience behind it.
*** New Gen 2 version ***
Out of stock- $299.00AUD
- including GST
Powerbox Accessories kit for Smokepump
Patchleads, Y-piece, heat-resistant, rubber hose
- $14.90AUD
- including GST
APS PowerSmoke HV-V3 Smoke pump with self venting cut-off valve
PowerSmoke HV-V3 Smoke pump with integral self venting cut-off valve
High grade toothed wheel pump with metal gears. 2S LiPo/LiIon battery input via JR/Futaba connector.
The unique valve on this pump has a lot of benefits. It sits between the pump, muffler and the return line to the tank (vent line).
The use of this valve ensures that the pump does not accidentally let smoke oil through. This means the pump can also be mounted much lower than the smoke tank, without any issues of leaking.
An exact switching on and off of the smoke is now possible. Prolonged smoking or permanent smoking even when the pump is switched off is avoided by using this passive valve.
Also, the valve prevents the exhaust gases from being fed back into the pump and causing reliability issues.
The delivery rate of the pump is not reduced by using the valve.
This set contains: Smoke pump with fitted check valve, mounting brackets for the pump, T-piece, hose ca. 40cm, short instruction sheet
Only 3 left in stock.- $299.00AUD
- including GST
APS PowerSmoke self venting cut-off valve
The APS self venting cut-off valve is the same that is included with the APS PowerSmoke pump. It can be used on any brand smoke pump to improve the on/off performance and allow more flexibility with pump / tank location.
This unique valve has a lot of benefits. It sits between the pump, muffler and the return line to the tank (vent line).
The use of this valve ensures that the pump does not accidentally let smoke oil through. This means the pump can also be mounted much lower than the smoke tank, without any issues of leaking. The vent line will purge air from the system, returning to the tank, to prime the fluid up to the valve quickly.
An exact switching on and off of the smoke is now possible. Prolonged smoking or permanent smoking even when the pump is switched off is avoided by using this passive valve.
Also, the valve prevents the exhaust gases from being fed back into the pump and causing reliability issues.
Only 5 left in stock.- $59.00AUD
- including GST