Pilot-RC 75" Sbach 342 V2 Scheme 10 Ryu Green

SKU: PRC SbachV2 75 10 Ryu Green-clo

Introducing New ! Sbach342 V2 75” New Era 30-40cc size Airframe

The 2011- era Pilot-RC Sbach 342 73″ was more than just an RC airplane. It was an icon that combined a stunning, modern design with exceptional all-around flight performance, backed by Pilot-RC’s quality and flown by the best pilots in the world, leaving a lasting mark on the hobby.

It’s a model that is still remembered very fondly by pilots today.

Introducing the NEW Pilot RC Sbach 342 V2 75″

The next-generation Sbach 342 is here, This V2 design masterfully combines the legendary smoothness of the original 73″ Sbach with unmatched, modern Xtreme Aerobatics (XA) precision.

we have special modern scheme 10 design by Ryu Sintuphrom

and 11 design by Joe Hampson

Constructed with a full airframe of new plywood, composite fiberglass, and carbon fiber—consistent with our current 3D aircraft—it is built for performance. After extensive testing and design refinements, we have perfected its flight characteristics.

Leading the project design, Ryu Sintuphrom and our factory team pilots thoroughly carried out a long development and test process to get the best 30cc airframe performance.

Specifications:

Model:	Sbach 342V2
Wingspan:	75″ (1.90m)
Length:	74″ (1.87m) including spinner 3.5inch
Wing area:	1,125″² ( 7,264cm²)
Weight:	12.3lbs (5.6kg)

FEATURES:

NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings, stabilizer and SFG
NEW! Patented quick assembly system for canopy.
Film covering applied over a Genuine German Oracover (Ultracote) base
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
Removable wings and NEW quick release for stabs no tools require
Laser engraved motor mounting position
Easy canister installation due to open construction
Pull push and Pull pull system for Rudder servo

Included hardware:

Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fiberglass control horns and wheel pants)
“Spare” lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axles and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner, 3.5″

Required hardware:

Motor: 30-40cc or equivalent electric

Servos: 5 high torque plus throttle // Uses x1 per aileron, x1 per elevator half and x1 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.