Pilot-RC 103" Sbach 342 V2 Scheme 10 Ryu Green

SKU: PRC SbachV2 103 10 Ryu Green

The 2011- era Pilot-RC Sbach 342 107″ was more than just an RC airplane. It was an icon that combined a stunning, modern design with exceptional all-around flight performance, backed by Pilot-RC’s quality and flown by the best pilots in the world, leaving a lasting mark on the hobby.

It’s a model that is still remembered very fondly by pilots today.

Introducing the NEW Pilot RC Sbach 342 V2 103″

The next-generation Sbach 342 is here, This V2 design masterfully combines the legendary smoothness of the original 107″ Sbach with unmatched, modern Xtreme Aerobatics (XA) precision.

We have special modern scheme 10 design by Ryu Sintuphrom and 11 design by Joe Hampson

Constructed with a full airframe of new plywood, composite fiberglass, and carbon fiber—consistent with our current 3D aircraft—it is built for performance. After extensive testing and design refinements, we have perfected its flight characteristics.

Specifications:

Model:	Sbach 342 V2
Wingspan:	103.9″ (2.647m)
Length:	102″ (2.603m) with spinner 5″
Wing area:	1,875″² ( 12,100cm²)
Weight:	28.4lbs (12.9kg)

FEATURES:

Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
Patented quick assembly system for wings,
NEW! 2024 quick assembly system for Stabilizer no need tools anymore
Patented quick assembly system for canopy.
NEW! Canopy pin more reliable fix it by Screw and New Material hole to stop vibration
Film covering applied over a Genuine German Oracover (Ultracote) base
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no visible external screws exposed
Removable wings and stabs
Laser engraved motor mounting position
Easy canister installation due to open construction
Pull push system for Rudder servo
Removable landing gear sperate left and right side

Included hardware:

Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fiberglass control horns and wheel pants)
“Spare” lower section cowl from transparent plastic – used to mark out correct location to cut the cowl for perfect fitting every time
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axles and wheel pants
Pre-prepared pushrods with ball links
Matching color carbon spinner, 5″ and we also have special color scheme to purchase

Required hardware:

Motor: 100-130cc or equivalent electric

Servos: 5 high torque plus throttle // Uses x2 per aileron, x1 per elevator half and x1 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.