Dimensions: 40.5 x 21.0 x 37.2 mm
Weight: 74 g
[Speed] 0.11 sec / 60° (7.4 V)
0.12 sec/60° (6.6 V)
[Torque] 41.0 kgf・cm (7.4 V)
36.8 kgf cm (6.6 V)
● S.BUS system
● Coreless motor
● Metal 2-3 speed gear
● Metal final gear
● Aluminum middle case
** PLEASE NOTE THE THETA 921A REQUIRES A MICRO 25T COMPATIBLE SERVO ARM **
Theta 921A HV Micro Servo -Ideal for 48-49" 3D aircraft and other Micro applications.
Extreme Flight RC recommend the Theta 989 mini servo for 67" aerobatic aircraft. They choose this very high-performance servo for their 67" RxR aircraft.
The 989 is well-matched to our EF 1.25" 25T lightweight servo arms.
The THL798 Theta Servo is a full size brushless servo that is capable of handling high voltage of up to 8.4V. The high torque brushless servo delivers incredible power and can be used for RC airplanes, cars, and trucks.
Features:
Introducing the Theta SPB-1 Servo Program Box – your go-to for modifying all the parameters of your Theta servos! This convenient, advanced program box gives you the power to fine-tune your seros with accuracy and precision; from centering, direction, current draw and pulse width, you can easily configure every aspect of your Theta servos.
No need for a NFC enabled Android phone either; this program box can modify parameters of a wide variety of servos including the Kenny Ko edition (THS921) that are not NFC enabled. All this power packed in an easy-to-use device – what could be better?
The PowerBox iServo HVC.45 has been completely developed according to our specifications. The housing design alone indicates that the new iServo is something special. Top quality, maximum durability and, above all, maximum precision were the top priorities during development.
The PowerBox iServo HVC.45 was designed in coreless technology for high starting torque, maximum position accuracy and rock-solid holding accuracy. In conjunction with a high-precision Hall sensor, a special control algorithm has been developed that is unparalleled in terms of positioning speed. The PowerBox iServo HVC.45 does not overshoot when reaching the target position. The largest possible ball bearings on the 8 mm output shaft and solid gears give our high-end servo the necessary durability.
The connection for the patch cable disappears completely into the housing and is secured with a screw-on retaining clip. Cutting cables and soldering extensions is therefore a thing of the past.
Electronically, the PowerBox iServo HVC.45 has something unique to offer: for the first time, two large capacitors are built into the servo. This effectively prevents reverse currents and, above all, provides energy for the motor when current peaks have to be absorbed due to the cable length.
The software puts the new iServo at the forefront of what is technically feasible. The PowerBox iServo HVC.45 not only works with the PWM standard, but also with the widely used S.BUS. However, the full functionality of the iServo is utilized with the P²-BUS. The P²-BUS provides all telemetry data in real time on the transmitter display. In addition, the servo can be fully parameterized via the transmitter.
The setting options are huge: servo travel (±5000°), current limiting, holding characteristics, start-up characteristics and much more.
The settings can be made not only via our PowerBox transmitters, but also with the Mobile Terminal!
The SAVÖX SB-3290SG servo is a brand new patented technology developed by SAVÖX.
With the new SB-3290SG servo, Taiwanese manufacturer Savöx has once again made a revolution in servo drive technology. The newly developed eight-pole AC motor of this "monster" not only provides a lower weight (72 g) compared to its predecessor SB-2290SG (81 g), but also higher efficiency and significantly lower heat production. After 5 minutes of operation, it remains up to 20% cooler than the SB-2290SG model. This significant improvement means that the servo delivers maximum power for much longer, and the model is much "harder, more direct and more accurate."
Thanks to the latest technology, the SB-3290SG tube is much quieter and almost inaudible during normal operation. The well-known "beep" of digital servos has been almost eliminated without having to accept any drawbacks.
Especially in extreme flights with heavy loads, there is an unparalleled increase in performance. An all-new motor design with a newly developed 32-bit MCU (Motor Control Unit) carries many advantages that offer ambitious 3D and aerobatic pilots new possibilities in flight.
By comparison, the SB-3290SG's resting current is about 80 mA, while the SB-2290SG requires about 250 mA.
The lower weight is particularly advantageous for large models weighing up to 25 kg. When installing the SB-3290SG servo, a difference of 9 grams per servo is clearly visible, making it easier to find the ideal center of gravity.
The SB-3290SG was tested for several months in countless tests by the best pilots in Germany and improved step by step, until we reached the point where we can talk about a real revolution, not just a product tuning !
To facilitate individual wiring, the negative pole of the cable is no longer completely black as in the SB-2290SG, but is now gray, making it more recognizable.
Of course, the SB-3290SG has a soft start, meaning that the servo slowly moves to the desired position as soon as the power supply/amplifier is turned on.
The SB-3290SG servo is suitable for use in helicopters, RC cars and fixed-wing models. The patented SB-329X series will be expanded to include other types of servos in the near future.
The servo features a much larger AC motor, which not only provides high power and speed, but also optimally dissipates heat thanks to its aluminum housing. Thanks to the new motor and gearbox concept, it was possible to add a third ball bearing to the servo, improving accuracy and reliability.
Features:
Specifications:
this servo are designed around foam Pilot-RC 39″ PP plane which is lightweight and offers high performance torque and speed suitable this 15E size airframe – all at an affordable price
| Type | Micro – coreless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 3.1kg (at 8.4v) 2.8kg (at 7.4v) 2.3kg (at 6.0v) |
| Speed | 0.05s at 8.4v 0.06s at 7.4v 0.08s at 6.0v |
| Weight | 9g |
| Dimensions | 23.5mm x 8.5mm x 24mm |
| Spline | 15T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, this particular servo is tailored for 49″ airframe and small jet and foam EDF airframe this servo delivering strong torque, high speed and precise centering
| Type | Micro – Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 7.5kg (104 oz) at 8.4v 6.6kg (92 oz) at 7.4v |
| Speed | 0.08s at 8.4v 0.09s at 7.4v |
| Weight | 20.5g |
| Dimensions | 23mm x 12.6mm x 26.3mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come packed with features and ready to hold up to even the toughest of jobs,
this particular servo is tailored for 115″-120″ airframe and large scale aircraft and sport jets
we tested it on 40% 3D aerobatic plane, The Extra NG it delivering outstanding performance with super strong torque it’s truly on another level you can just use two servo per aileron and perform snap roll at high speed with no blowback whatsoever
NEW FEATURE: Interchangeable servo leads:
Each servo comes ready to use with a standard 30cm lead.
Need a longer lead though?
Included with the servo is a 170cm lead that can be shortened as per your requirements.
Simply remove the servo’s lower casing and swap the short 30cm lead for the
included much longer 170cm lead, and crimp the JR connector
provided to the other end at your chosen length.
The servo uses conventional servo connectors at the servo end,
meaning leads can be made or replaced without issue.
| Type | Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 68kg (945 oz) at 8.4v 61kg (848 oz) at 7.4v |
| Speed | 0.10s at 8.4v 0.11s at 7.4v |
| Weight | 91g |
| Dimensions | 40mm x 20mm x 39.85mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
The Pilot-RC Simple Servo Adjuster is intended mainly for use on servos that control gear doors.
It allows you to control the servo speed, reverse, end points and sub-trim.
The main use for the Simple Servo Adjuster is for use on Gear Doors, when your receiver, powerboat or radio does not have enough free channels to independently setup and program the door servos. It can also be used to intentionally use the same channel as the gear switch to keep your setup simple.
All is controlled intuitively via the three rotary knobs and reverse switch.
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
| Type | Mini – Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 21.5kg (296 oz) at 8.4v 18.9kg (260 oz) at 7.4v |
| Speed | 0.079s at 8.4v 0.089s at 7.4v |
| Weight | 52g |
| Dimensions | 35.9mm x 15mm x 33mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
3.9kg.cm @ 6v Over-spec refined design out performs ordinary micro size servo. The aluminum case design looks awesome and allows for cooler operating temperatures. Precision metal gears form a strong and solid framework. Strict production and quality control of plastic components ensures long life and reliability.
Features:
- Leading edge digital servo technology
- High efficiency Coreless motor
- Accurate and fast response
- Super high resolution
- Aluminium center case for improved motor cooling and total strength
- Ball beared
- Precision Metal gears
Technical specifications:
Servo Technology: Digital High Voltage
Input Voltage (V): 6.0V - 7.4V
Servo Type / Size: Midi
Motor Type: Coreless Motor
Gear Material: Metal Gears
Ball Beared: Ball Beared
Servo Case: Aluminium - Composite
Speed 60°/Sec @ 7.4V: 0.055 Sec/60°
Torque kg/cm @ 7.4V: 12.0 Kg/cm
Length (mm): 35.0 mm
Width (mm): 15.0 mm
Height (mm): 30.7 mm
Weight (g): 29.5 g
Connector type: JR
Spline size: 25T Spline
The SV1261MG takes the performance of the SV1260MG and utilizing the same size case, increased the torque to a whopping 277oz/in while maintaining an impressive 0.095 second transit time. Primarily intended for air applications, this powerhouse can also be used in specialty cars, trucks, and boats and is intended to be used on direct 7.4V LiPo current.
Features:
Metal gear train provide durability against heavy use
Capable of HV operation
All aluminum case provides strength and cooler operating temperatures
Specifications:
Torque @ 7.4v: 20.0kg/277oz./in
Torque @ 6.0v: 15.0kg/208oz./in
Speed @ 7.4v: 0.095 sec/60 deg
Speed @ 6.0v: 0.12 sec/60 deg
Dimensions L x W x H (mm): 35 x 15 x 30.7
Weight: 40.0g / 1.4 oz
Features:
Specifications:
Features:
- Leading edge digital servo technology
- High efficiency Coreless motor
- Accurate and fast response
- Super high resolution
- Aluminium center case for improved motor cooling and total strength
- Ball beared
- Precision Metal gears
Technical specifications:
Servo Technology: Digital High Voltage
Input Voltage (V): 6.0V - 7.4V
Servo Type / Size: Midi
Motor Type: Coreless Motor
Gear Material: Metal Gears
Ball Beared: Ball Beared
Servo Case: Aluminium - Composite
Speed 60°/Sec @ 7.4V: 0.095 Sec/60°
Torque kg/cm @ 7.4V: 8.0 Kg/cm
Length (mm): 35.0 mm
Width (mm): 15.0 mm
Height (mm): 29.2 mm
Weight (g): 29.5 g
Connector type: JR
Spline size: 25T Spline
This Dualsky DS9431 is designed for 3D helicopters & airplanes.
The SV-0320 is a budget-friendly, standard digital servo which is capable of running high voltage.
Features:
Specifications:
This is the Savox SC-0251 High Torque Metal Gear Digital Servo.
This is a great choice for a throttle servo.
Features:
Super strong and precision made unique steel gears provide durability and survive heavy use.
Sleek black design with laser etching and a shorter 200mm black lead wire.
Capable of HV operation.
Good speed and torque for numerous applications.
Great replacement for RTR vehicles and other applications.
Specifications:
Torque @ 6v - 13.0kg/180.5oz-in
Torque @ 7.4v - 20.0kg/277.7oz-in
Speed @ 6v - 0.11 sec/60 deg
Speed @ 7.4v - 0.095 sec/60 deg
Dimensions L x W x H (mm): 40.3 x 20.2 x 37.2
Weight: 62.0g
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
NEW FEATURE: Interchangeable servo leads:
Each servo comes ready to use with a standard 30cm lead.
Need a longer lead though?
Included with the servo is a 170cm lead that can be shortened as per your requirements.
Simply remove the servo’s lower casing and swap the short 30cm lead for the
included much longer 170cm lead, and crimp the JR connector
provided to the other end at your chosen length.
The servo uses conventional servo connectors at the servo end,
meaning leads can be made or replaced without issue.
| Type | Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 28.7kg (399 oz) at 8.4v 25.8kg (359 oz) at 7.4v |
| Speed | 0.056s at 8.4v 0.063s at 7.4v |
| Weight | 93g |
| Dimensions | 40mm x 20mm x 39.85mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
The new "Plus" version that is extremely powerful for its size now pushing 45kg.cm torque. Super strong and precision made titanium gears provide high level of durability that will survive heavy use. Coreless motor brings output performance to the top level – smoother, faster, and more efficient.
Special design for high voltage native 2s LiPo operation. Water-resistant with 4 silicon seals. Our servos are totally green – from materials to production, these servos are environmentally friendly. Ideal for large-scale airplane, jet, and 1/5th scale surface
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
NEW FEATURE: Interchangeable servo leads:
Each servo comes ready to use with a standard 30cm lead.
Need a longer lead though?
Included with the servo is a 170cm lead that can be shortened as per your requirements.
Simply remove the servo’s lower casing and swap the short 30cm lead for the
included much longer 170cm lead, and crimp the JR connector
provided to the other end at your chosen length.
The servo uses conventional servo connectors at the servo end,
meaning leads can be made or replaced without issue.
| Type | Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 37.8kg (525 oz) at 8.4v 35.5kg (493 oz) at 7.4v |
| Speed | 0.07s at 8.4v 0.08s at 7.4v |
| Weight | 93g |
| Dimensions | 40mm x 20mm x 39.85mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
Desert Aircraft DA600Pro Servo
42kg.cm @ 7.4v Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears. Ideal for use in Giant airplanes. Brushless motor provides longer life and cooler operating temps. Extremely strong unique steel gears ensure long-life and durability. The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
Pilot-Rc’s range of servos offer a mix between torque, speed and importantly affordability. They are designed around modellers, which is why they come as standard with extra long leads and with an included Aluminium servo arm in order to hold up to even the toughest of jobs.
NEW FEATURE: Interchangeable servo leads:
Each servo comes ready to use with a standard 30cm lead.
Need a longer lead though?
Included with the servo is a 170cm lead that can be shortened as per your requirements.
Simply remove the servo’s lower casing and swap the short 30cm lead for the
included much longer 170cm lead, and crimp the JR connector
provided to the other end at your chosen length.
The servo uses conventional servo connectors at the servo end,
meaning leads can be made or replaced without issue.
PW-48AH SPECIFICATIONS:
| Type | Brushless Digital |
| Voltage | 5.0v-8.4v |
| Torque | 48kg (667 oz) at 8.4v 43kg (598 oz) at 7.4v |
| Speed | 0.10s at 8.4v 0.11s at 7.4v |
| Weight | 93g |
| Dimensions | 40mm x 20mm x 39.85mm |
| Spline | 25T (futaba) |
| Gear | Steel |
| Bearings | Yes (x2) |
