XPWR 35cc Motor
Xpwr 35cc- This motor was developed for the EF 74" Edge and Laser and other models of similar size and weight. 12S Lipo operation and 120 Amp HV speed controller minimum. 35cc notes: Our testing was carried out on Castle Creations HV120 ESC using firmware v4.22, expect 75 amps peak on fresh charged high quality 12s Lipo packs using largest prop for approximately 3,500 watts.
Specifications
Weight: 774 grams (including radial mount and prop adapter)KV: 220
Pole: 24 Stator Poles
Bullet connectors: 6.5 mm female installed, male bullet connectors included
Recommended prop: 20 x 10, 20 x 12, 21 x 10 beechwood - ELECTRIC PROPS ONLY
Note on using largest prop recommendation for each motor: The largest prop recommendation for each motor is a maximum-performance prop for 3D and extreme aerobatic flying. It is not needed or recommended for sport flying where long, sustained full-throttle usage is intended. It is for aerobatic flight where full-throttle is used in bursts.
Maximum temperature (on outside of motor): 175F / 80C
NOTE: Testing carried on Castle EDGE ESC's with v 4.22 firmware. For best results, we recommend Castle EDGE controllers. We are currently working with Castle on compatibility with TALON controllers, please stay tuned for updates.
A detailed explanation written by Ben Fisher of the proper applications for the new Xpwr motors.
XPWR 35CC applications:
Extreme Flight 74" Edge, 74" Laser are perfect airframes for the 35CC at 12+ pounds or so. 12S 3700 mah lipo is my choice, I use Pulse 45C and 65C. On a 20x10 or 21x8 or 21x10 (depends how powerful your individual batteries and your weather/altitude) you'll look for about 3600W to give you, again, about 300 watts per pound. We have custom-fit BlazingStar standoffs for these combos in stock for easy, quick mounting. The 35CC is also an excellent choice for a light setup on the 78" Extreme flight MXS. You're still very close to 300 Watts/pound. Use a 120 amp ESC on the 35CC.
